CAT 6E-0763 RETAINER

CAT 6E-0763 is a Caterpillar original snap-on elastic retainer, suitable for positioning and securing wiring harnesses, oil lines, or small components in equipment such as mini excavators and loaders. The following is raw data and does not include information on replacement parts.

Core Technical Parameters (Raw Data)

Item Details
Basic Attributes
Model 6E-0763, Type: Clip-on elastic retainer, Material: 66 Nylon (PA66), Weight: 0.05 kg, Operating Temperature: -40℃ to +120℃, Tensile Strength ≥60 MPa, Elongation at Break ≥30%, Fire Rating: UL94 V-0
Key Dimensions (Metric/Imperial)
Length: 96.5 mm (3.8 in), Width: 7.6 mm (0.3 in), Height: 71.1 mm (2.8 in), Clip Opening Width: 6-10 mm, Suitable for fixing wire harnesses/hydraulic hoses with a diameter of 6-9 mm, Mounting Groove Thickness: Suitable for plates of 1.5-2.5 mm, Clip Clamping Force ≥50 N
Compatible Models and Parts
Compatible with Excavators 305.5E, 306E, 307E, Loaders This product is used for fixing engine compartment wiring harnesses, hydraulic hoses, and sensor wiring harnesses in models such as 906H, 907H, and 908H. Compatible parts include small pins or wiring harness fixing points such as 207-6055 and 207-6056.

Structural and Performance Characteristics:

Flexible Fixing: Made of highly flexible PA66 material, the snap-fit ​​design allows for quick installation and removal, adapting to wiring harnesses/hydraulic hoses of different diameters, ensuring reliable fixing.

Weather and Wear Resistance: Resistant to oil and chemical corrosion, suitable for harsh working conditions in engineering machinery, and resistant to aging and breakage over long-term use.

Lightweight: Lightweight, adding no extra burden to the equipment, requiring little installation space, and suitable for compact locations.

Installation and Maintenance Points (Original Data)

Installation: Clean the mounting surface, removing oil and rust, and ensure the mounting groove size matches the width of the fixing device.

Align the fixing device snaps with the mounting groove and press firmly until the snaps are fully engaged, ensuring the fixing device fits snugly against the mounting surface without loosening.

When securing wire harnesses/oil pipes, ensure the clips completely cover the wires and avoid contact with sharp parts to prevent abrasion.

Maintenance: Check the condition of the retainer every 500 hours. If cracks, deformation, or loose clips are found, replace it immediately.

Avoid prolonged exposure to high temperatures (>120℃) or strong chemical environments to prevent material aging.