CAT 093-6516 RETAINER

CAT 093-6516 (0936516) is a dedicated track pin retainer (retaining ring retaining clip) for Caterpillar 700GT track assemblies. It is used to lock the track pin bearing cap and inner retaining ring, preventing axial movement of the bearing cap, inner retaining ring, and track pin during track operation. It is compatible with the track travel system of medium-duty excavators 700GT, ensuring stable assembly of the track pin and bearing.

Core Parameters and Information

Item Details
Part Model: CAT 093-6516 (0936516) Track Pin Fixer (Track Pin Fixing Clip)

Type: 700GT Track Assembly Track Pin Axial Fixing Component, Locking Component

Material: Spring steel (65Mn), galvanized and passivated surface, good elasticity, fatigue resistance, and corrosion resistance

Key Dimensions: Opening width approx. 28mm, thickness approx. 3mm, length approx. 42mm, single weight approx. 0.12kg

Compatible Models: CAT 312, 313, 315 and other medium-sized excavators (compatible with 700GT track assembly)

Matching Relationship: Compatible with 093-6082/093-6514 bearing caps, 093-6046 inner retaining rings, and 700GT track pins; one piece per track pin.

Compatibility and Application

Compatible Parts: 700GT The track pin end of the track assembly engages with the track pin retainer groove, locking the bearing cap and inner retaining ring to prevent axial movement and component loosening, ensuring stable relative positioning of the track pin and bearing.

Application Scenarios: Earthmoving, municipal engineering, and other working conditions. Compatible with the 700GT track assembly, preventing track pin loosening and bearing damage due to fixation failure, thus improving the reliability of the track system.

Core Functions: Axially locks the bearing cap and inner retaining ring, preventing component displacement during track operation, reducing abnormal wear of the track pin and bearing, and ensuring stable operation of the track system.

Installation and Maintenance Points:

Installation: Clean the track pin retainer groove and check for deformation and cracks; align the retainer opening with the track pin retainer groove, use snap ring pliers to engage and secure it in place, ensuring a tight fit with the bearing cap end face without looseness.

Maintenance: Check the retainer’s elasticity and engagement status every 100 hours. Replace immediately if deformed, broken, or loose to prevent component failure.

Replacement: Original parts are preferred. After installation, the tracks are tested to ensure there are no abnormal noises or component displacement, thus guaranteeing reliable fixation.