CAT 093-7096 RETAINER

CAT 093-7096 (0937096) is a dedicated track tensioner for the Caterpillar 700GT track assembly. It locks the relative position of the internal spring base and guide wheel support of the tensioner, preventing component displacement during operation. It is compatible with the Caterpillar 700GT medium-duty excavator track system, ensuring stable operation of the track tensioning mechanism.

Core Parameters and Information

Item Details
Part Model: CAT 093-7096 (0937096) Fixing Device (Track Tensioner Positioning Lock)

Type: 700GT Track Assembly Tensioner Spring Base and Support Positioning Lock

Material: 40Cr alloy steel, heat treated (HB220-250), blackened surface oxidation, high strength, high hardness, wear resistance

Key Dimensions: Outer diameter approx. 105mm, inner diameter approx. 80mm, thickness approx. 25mm, single weight approx. 1.8kg

Compatible Models: CAT 312, 313, 315 and other medium-sized excavators (compatible with 700GT track assembly)

Matching Relationship: Matches with 093-6537 spring base, guide wheel support, and tensioning cylinder; one unit per track tensioner side.

Compatibility and Application

Compatible Parts: 700GT The track tensioning device, installed inside the track assembly between the spring base and the guide wheel support, locks their relative positions, preventing displacement of the spring base under track impact and ensuring stable tension transmission.

Application Scenarios: Earthmoving, municipal engineering, road construction, etc. Compatible with the 700GT track assembly. By locking the component position, it reduces abnormal wear of the track tensioning mechanism and improves the reliability of the track system.

Core Functions: Locks the spring base and guide wheel support, preventing component displacement, ensuring stable tension transmission, buffering walking impact, maintaining stable track tension, and ensuring smooth operation of the track system.

Installation and Maintenance Points:

Installation: Clean the fixing device and mating parts, checking for cracks and deformation; align the spring base and guide wheel support positioning slots, tighten the bolts (torque 60-80 N·m), ensuring a tight fit with the base end face without looseness.

Maintenance: Every 200 hours, check the tightness of the retaining bolts, surface wear, and cracks. Replace any loose or damaged bolts immediately. Simultaneously check the clearance between the spring base and the guide wheel support.

Replacement: Use original parts whenever possible. After installation, test the track tension; ensure it is normal, and that there are no abnormal noises or impacts during movement, guaranteeing stable operation of the tensioning device.