CAT 082-2087 RETAINER

CAT 082-2087 (0822087) is a Caterpillar original cab wiring harness fixing clip/elastic clamp, compatible with 307E2/308E2 excavators and 242D/246D skid steer loaders. It is used to secure wiring harnesses and conduits inside the cab, preventing vibration and wear, and is suitable for high-frequency vibration conditions, ensuring stable and safe wiring.

(Caterpillar 082-2087 is a Caterpillar original manufacturer … Core Parameters and Information

Item Details
Part Model: CAT 082-2087 (0822087) Wire Harness Fixing Clip / Elastic Clamp

Type: Elastic clip for engineering machinery, suitable for wire harness/pipe fixing

Material: Reinforced nylon PA66+30% glass fiber, resistant to high and low temperatures, anti-aging

Key Dimensions: Clip diameter 8-12mm, mounting hole diameter 6mm, clip spacing 18mm, clip stroke 4mm

Performance Parameters: Clip force 60-90N, temperature resistance -40℃ to +120℃, UV resistant, suitable for high-frequency vibration conditions

Compatible Models: CAT 307E2/308E2 excavators, 242D/246D skid steer loaders

Matching Relationship: Compatible with wire harnesses, pipes, and mounting brackets, providing quick clip-on fixing

Applications
Compatible Parts: 307E2/308E2 The control lever wiring harness, hydraulic lines, and sensor wiring inside the cab of excavators and 242D/246D skid steer loaders are secured using a flexible snap-fit ​​structure to prevent wear and short circuits caused by vibration, making it suitable for high-frequency vibration conditions (Cat).

Application Scenarios: Suitable for long-term high-frequency vibration operations such as excavation and loading, including continuous excavation and shoveling operations, ensuring the stability of wiring harnesses and pipes, preventing line wear and short circuits, reducing the risk of failure, and improving operational safety and reliability (Cat).

Compatible Use: Used with wiring harnesses, pipes, and mounting brackets. The snap-fit ​​provides flexible clamping force, and the bracket transmits fixing force, adapting to long-term operation requirements and preventing component fatigue and loosening.

Installation and Maintenance Points:
Installation: Clean the mounting holes and confirm that the snap-fit ​​size matches the mounting hole; align the snap-fit ​​with the mounting hole, press the snap-fit ​​feet to allow it to elastically retract and embed into the hole, ensuring the snap-fit ​​is fully engaged without loosening or jamming, and check that the clamping force is even and there is no abnormal deformation.

Maintenance: Check the clips for aging, breakage, or weakened clamping force every 200 hours. Replace immediately if surface cracks or insufficient clamping force are found to prevent wiring harness and conduit fixation failure.

Replacement: Disassemble the old part and check for wear on the mounting holes. Repair any parts with wear exceeding 0.5mm. Before installing the new part, check the clip spacing and clip diameter to ensure they match the original specifications. After installation, test the wiring harness and conduit for looseness and wear.