CAT 082-2467 ADJUSTER

CAT 082-2467 (0822467) is a Caterpillar genuine cab panel/wiring harness fixing adjuster, compatible with 307E2/308E2 excavators and 242D/246D skid steer loaders. It is used for adjusting and securing the position of control lever panels, trim panels, and wiring harnesses inside the cab. It allows for fine-tuning of the installation gap, accommodates panels of different thicknesses, and features a flexible adjustment and snap-fit ​​structure to prevent vibration-induced loosening and abnormal noise, ensuring operational stability and driving comfort.

Core Parameters and Information

Item Details
Part Model CAT 082-2467 (0822467) Panel / Wiring Harness Fixing Adjuster

Type: Flexible adjusting clip for construction machinery, suitable for cab panels and wiring harness fixing

Material: Reinforced Nylon PA66+30% Glass Fiber, resistant to high and low temperatures, anti-aging

Key Dimensions: Clip foot 28mm, clip diameter 15mm, mounting hole diameter 8mm, adjustment stroke 3-8mm

Performance Parameters: Adjustment force 60-100N, temperature resistance -40℃ to +120℃, UV resistant, suitable for high-frequency vibration conditions

Compatible Models: 307E2/308E2 excavators, 242D/246D skid steer loaders

Matching Relationship: Compatible with control lever panels, decorative panels, and wiring harness mounting brackets, providing flexible adjustment and snap-fit ​​fixing

Applications
Applicable Parts: 307E2/308E2 The control panel, trim panel, interior trim panel, and wiring harness mounting points in the excavator and 242D/246D skid steer loader cab utilize an elastic adjustment structure for fine-tuning and quick fixing of gaps, preventing vibration-induced loosening and abnormal noise.

Application Scenarios: Suitable for prolonged high-frequency vibration operations such as excavation and loading, including continuous excavation and shoveling operations. It ensures the stability of the control panel and wiring harness, preventing loosening that could affect operation, reducing abnormal noise interference, and improving driving comfort and safety.

Compatible Use: Used with control panel, trim panel, and wiring harness mounting brackets. The adjuster provides elastic adjustment force, while the bracket transmits fixing force, suitable for long-term operation and preventing component fatigue and loosening.

Installation and Maintenance Points:

Installation: Clean the mounting holes and confirm that the adjuster size matches the mounting hole. Align the adjuster with the mounting hole, press the locking feet to allow it to elastically retract and embed into the hole, fine-tune to the appropriate position, ensuring it is fully engaged without loosening or jamming. Check that the adjustment force is normal and there is no abnormal deformation.

Maintenance: Check the regulator every 200 hours for aging, breakage, or reduced adjustment force. Replace immediately if surface cracks or insufficient adjustment force are found to prevent panel and wiring harness fixation failure.

Replacement: Disassemble the old part and check for wear on the mounting holes. Repair if wear exceeds 0.5mm. Before installing the new part, check the diameter of the clips and buckles to ensure they match the original specifications. After installation, test the panel and wiring harness for looseness and abnormal noise.