Description
CAT 093-6967 SHOE TRACK
| CAT 093-6967 SHOE TRACK |
| CAT 093-6971 COVER BEARG |
| CAT 093-7096 RETAINER |
| CAT 093-7134 RETAIN SPRNG |
| CAT 093-7824 BEARING |
| CAT 093-7953 RETAINER |
| CAT 093-7972 RETAINER |
| CAT 093-8037 SEAT SPRING |
The CAT 093-6967 is a Caterpillar original equipment manufacturer (OEM) standard double-tooth track shoe adapted for specific models. It belongs to the 190mm pitch, 600mm width series, suitable for low-to-medium impact applications such as earthmoving and municipal engineering. It shares the same platform as the 093-6965/6966/6960, with common core specifications, balancing traction and steering agility.
Key Parameters (Original Nominal, please contact an authorized Cat dealer for precise engineering drawings)
Item Details
Part Model: CAT 093-6967 (0936967) Double Grouser Track Plate
Material and Process: Rolled boron alloy steel + overall heat treatment, hardness HB380–420, hardened layer ≥8mm; CAT yellow primer + wear-resistant coating, salt spray ≥480h
Structure Specifications: Double Grouser, standard hole positions, non-self-cleaning/non-offset; suitable for pitch 190mm, track plate width 600mm; comes with 2 sets of track bolts and nuts (recommended 9W-3361/6Y-0846)
Single Weight: Approx. 29.1 kg (64.1 lbs)
Rated Operating Conditions: Moderate impact, non-abrasive environment; check wear/bolt torque every 500 hours
Compatible Models: Compatible with some small CAT tracked equipment, also compatible with… E70B, 307, 312 and other small excavators, D4, D5 series bulldozers; final verification is based on chassis serial number + mounting hole spacing.
Installation Parameters: Bolt specifications 1/2″-20 UNF, installation torque 380–420 N・m, tightened in two crisscrossing stages.
Adaptation and Application Points:
Functional Positioning: The double-tooth design results in low steering resistance, suitable for frequent turning scenarios such as municipal engineering and pipeline construction. It provides stable ground support and traction, effectively protecting track links.
Matching Specifications: Replace track shoes in pairs from the same batch; do not mix different materials/thicknesses; tighten bolts in two crisscrossing stages at 380–420 N・m, and recheck torque after warming up the machine to prevent loosening.
Replacement Standards: Tooth wear > 40%, track shoe cracks, hole deformation / Replace track plates immediately if they are stripped or the hardened layer has peeled off; do not weld cracked plates for repair.
Installation and Maintenance Procedure: Stop the machine on a level, hard surface. Support the machine body, loosen the track tension cylinder, and remove the old track plates.
Clean the mounting surfaces of the track links and the bolt holes of the new plates, removing rust and oil.
Tighten the bolts twice in a crisscross pattern using a torque wrench (initially 70% torque, final tightening 100%).
Restore track tension, drive the machine unloaded for 10 minutes, and then recheck the torque.
Maintenance Cycle: 500 hours under standard operating conditions; 300 hours under high dust/humid conditions. Inspect tooth surface wear, plate cracks, and bolt anti-loosening marks.
