Description
CAT 096-3164 SEAT
| CAT 096-3164 SEAT |
| CAT 096-3177 SEAT SPRING |
| CAT 096-3185 SEAT SPRING |
| CAT 096-3203 RETAINER |
| CAT 096-3408 CASE A |
| CAT 096-3891 Ball |
| CAT 096-3991 RETAINER |
| CAT 096-3995 RETAINER |
The CAT 096-3164 (0963164) is a mechanically suspended, mid-back operator seat assembly suitable for small and medium-sized construction machinery. It prioritizes basic comfort and durability, includes a three-point seatbelt, and is compatible with 906/907/908 mini loaders, 305/306 mini excavators, etc. It is a narrower, lighter version of the 096-3158, positioned as an economical driver’s seat solution.
Core Parameter Table (Original Manufacturer Nominal)
Item Details
Part Model CAT 096-3164 (0963164) Mechanical Suspension Mid-Back Operator Seat Assembly (including base, slide rails, three-point seat belt)
Structure Type Mid-back mechanical spring suspension, including front and rear slide rails, height/backrest adjustment mechanism, three-point automatic retractable seat belt, black wear-resistant vinyl fabric, metal stamped base + double spring assembly
Material Seat cushion/backrest is high-elasticity cold-foamed polyurethane; fabric is UV-resistant vinyl; frame is Q235 carbon steel + electrophoretic coating; springs are 65Mn silicon manganese steel, surface powder coating
Key Dimensions Seat width 420mm, total height 950mm, seat depth 440mm, seat height 390-450mm (adjustable); front and rear slide rail travel 160mm, backrest angle 90°-118° adjustable
Adjustment Function Forward/backward sliding (160mm), height adjustment (60mm), backrest angle (90°-118°), lumbar support (2 levels), weight adaptability (45-120kg)
Suspension and Safety: Mechanical spring suspension travel 40mm, vertical damping coefficient 0.75; three-point seat belt locking response ≤0.1s, adjustable length
Compatible Models: CAT 906, 907, 908 mini wheel loaders; 305, 306 mini hydraulic excavators; some small skid steer loaders (equipment serial number SN needs to be verified)
Single Set Weight: Approximately 28kg (including base, slide rail, seat belt)
Installation and Application Scenarios: Installation Positioning: Four standard mounting holes on the cab floor, equipped with 8.8 grade M10 bolts, torque 45-55N・m. After installation, the slide rails are smooth and the seat belt locking is normal.
Operating Conditions: Suitable for low-to-medium frequency vibration conditions such as municipal, agricultural, and small-scale infrastructure projects. The mechanical spring suspension isolates the impact of operation and driving. The mid-back design is suitable for short-duration driving needs.
Included Components: Seat rails, seat belt assembly, mounting base; During replacement, simultaneously check rail wear, spring elasticity, and seat belt locking performance.
Installation and Maintenance Points:
Installation Steps:
Clean the mounting surface, align the four holes, tighten the bolts, and test the rail sliding and seat belt locking.
Adjust the spring preload according to your weight to center the suspension travel. Adjust the backrest angle to 100°-105°, ensuring the lumbar support fits snugly against your back.
Maintenance Cycle: Check every 1000 hours under standard operating conditions; shorten to 500 hours under harsh operating conditions. Focus on checking rail lubrication, spring elasticity, seat belt locking, and fabric wear.
Replacement Standards: If the spring is broken/deformed, the rail is stuck, the seat belt locking is ineffective, the fabric is damaged or leaking, or the adjustment mechanism is malfunctioning, the entire unit must be replaced. It cannot be repaired or reused.
